Show Radius Accounting - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

11.2.9 show radius accounting

This command is used to display the configured RADIUS accounting mode, accounting
server and the statistics for the configured accounting server.
Format
Mode
If the optional token 'statistics
and the RADIUS accounting server details are displayed.
Mode
IP Address
Port
Secret
Configured
If you include the optional
configured RADIUS accounting server are displayed. The IP address parameter must
match that of a previously configured RADIUS accounting server. The following
information regarding the statistics of the RADIUS accounting server is displayed.
Accounting
Server IP
Address
Round Trip Time
Requests
Retransmission
Responses
Malformed
Responses
11-18
show radius accounting [statistics <ipaddr>]
Privileged EXEC
' is not included, then only the accounting mode
<ipaddr>
Enabled or disabled
The configured IP address of the RADIUS accounting server.
The port in use by the RADIUS accounting server.
Yes or No.
[statistics <ipaddr>]
IP Address of the configured RADIUS accounting server
The time interval, in hundredths of a second, between the
most recent Accounting-Response and the Accounting-
Request that matched it from the RADIUS accounting server.
The number of RADIUS Accounting-Request packets sent to
this accounting server. This number does not include retrans-
missions.
The number of RADIUS Accounting-Request packets
retransmitted to this RADIUS accounting server.
The number of RADIUS packets received on the accounting
port from this server.
The number of malformed RADIUS Accounting-Response
packets received from this server. Malformed packets include
packets with an invalid length. Bad authenticators and
unknown types are not included as malformed accounting
responses.
Port-Based Access and Authentication Commands
v1.0, December 2005
parameter, the statistics for the