Vlan Protocol Group Remove; Protocol Group - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
6.1.16.1 no vlan protocol group add protocol
This command removes the <
identified by this <
Format
Mode

6.1.17 vlan protocol group remove

This command removes the protocol-based VLAN group that is identified by this
.
<groupid>
Format
Mode

6.1.18 protocol group

This command attaches a
A group may only be associated with one VLAN at a time, however the VLAN
association can be changed.
The referenced VLAN should be created prior to the creation of the protocol-based VLAN
except when GVRP is expected to create the VLAN.
Default
Format
Mode
6.1.18.1 no protocol group
This command removes the
identified by this
Format
Mode
6-8
protocol>
. The possible values for protocol are
groupid>
no vlan protocol group add protocol <groupid>
<protocol>
Global Config
vlan protocol group remove <groupid>
Global Config
to the protocol-based VLAN identified by
<vlanid>
none
protocol group <groupid> <vlanid>
VLAN Config
<vlanid>
.
<groupid>
no protocol group <groupid> <vlanid>
VLAN Config
v1.0, December 2005
from this protocol-based VLAN group that is
from this protocol-based VLAN group that is
and .
ip, arp, ipx
.
<groupid>
VLAN Commands