Users Defaultlogin; Users Login; Show Authentication - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
11.1.14.1 no dot1x user
This command removes the user from the list of users with access to the specified port or
all ports.
Format
Mode

11.1.15 users defaultlogin

This command assigns the authentication login list to use for non-configured users when
attempting to log in to the system. This setting is overridden by the authentication login
list assigned to a specific user if the user is configured locally. If this value is not
configured, users will be authenticated using local authentication only.
Format
Mode

11.1.16 users login

This command assigns the specified authentication login list to the specified user for
system login. The
configured login list.
If the user is assigned a login list that requires remote authentication, all access to the
interface from all CLI, web, and telnet sessions will be blocked until the authentication is
complete.
Note that the login list associated with the 'admin' user can not be changed to prevent
accidental lockout from the switch.
Format
Mode

11.1.17 show authentication

This command displays the ordered authentication methods for all authentication login
lists.
Format
Mode
Authentication
Login List
11-8
no dot1x user <user> {<slot/port> | all}
Global Config
users defaultlogin <listname>
Global Config
must be a configured
<user>
users login <user> <listname>
Global Config
show authentication
Privileged EXEC
This displays the authentication login listname.
Port-Based Access and Authentication Commands
v1.0, December 2005
and the
<user> <listname>
must be a