User Account Commands; Users Name; Section 3.6 "User Account Commands - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

3.6 User Account Commands

This section describes the commands you use to add, manage, and delete system users.
The 7300 Series Managed Switch has two default users: admin and guest. The admin user
can view and configure system settings, and the guest user can view settings.
Note: You cannot delete the admin user, and there is only one user allowed with

3.6.1 users name

This command adds a new user account, if space permits. The account
up to eight characters in length. You can use alphanumeric characters as well as the dash
('-') and underscore ('_'). The
You can define up to six user names.
Format
Mode
3.6.1.1 no users name
This command removes a user account.
Format
Mode
Note: You cannot delete the "admin" user account.
3-18
read/write privileges. You can configure up to five read-only users on the
system.
<username>
users name <username>
Global Config
no users name <username>
Global Config
v1.0, December 2005
is not case-sensitive.
Administrative Access Commands
can be
<username>