Telnetcon Timeout; Show Telnet - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

3.3.7 telnetcon timeout

This command sets the telnet connection session timeout value, in minutes. A session is
active as long as the session has not been idle for the value you set, which ranges from 1-
160 minutes.
Note: Changing the timeout value for active sessions does not become effective
Default
Format
Mode
3.3.7.1 no telnetcon timeout
This command sets the telnet connection session timeout value to the default.
Note: Changing the timeout value for active sessions does not become effective
Format
Mode

3.3.8 show telnet

This command displays the current outbound telnet settings.
Format
Modes
Outbound Telnet
Login Timeout
Maximum Number
of Outbound
Telnet Sessions
Administrative Access Commands
until the session is reaccessed. Also, any keystroke activates the new
timeout duration.
5
telnetcon timeout <1-160>
Privileged EXEC
until the session is reaccessed. Also, any keystroke activates the new
timeout duration.
no telnetcon timeout
Privileged EXEC
show telnet
Privileged EXEC
User EXEC
Indicates the number of minutes an outbound telnet session is
allowed to remain inactive before being logged off.
Indicates the number of simultaneous outbound telnet con-
nections allowed.
v1.0, December 2005
3-11