Bgp Interval Minrouteadvint; Bgp Localmed - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

14.8.19 bgp interval minrouteadvint

This command sets the time interval in seconds for the minimum route advertisement
interval. This controls the frequency of route advertisements. The range for this field is 1
to 32767 seconds
Default
Format
Mode
14.8.19.1 no bgp interval minrouteadvint
This command sets the time interval to the default value for the minimum route
advertisement interval.
Format
Mode

14.8.20 bgp localmed

This command sets the local Multi-Exit-Discriminator (MED) value for the BGP4 router.
This metric is used to discriminate between multiple exit points to an adjacent autonomous
system. The range for this field is -1 to 2147483647
of this attribute.
Default
Format
Mode
14.8.20.1 no bgp localmed
This command sets the local Multi-Exit-Discriminator (MED) value to the default value
for the BGP4 router. This metric is used to discriminate between multiple exit points to an
adjacent autonomous system.
Format
Mode
14-74
.
30
bgp interval minrouteadvint <1-32767>
Router BGP Config
no bgp interval minrouteadvint
Router BGP Config
none
bgp localmed <localmed>
Router BGP Config
no bgp localmed
Router BGP Config
v1.0, December 2005
A value of -1 indicates the absence
.
Routing Commands