NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual page 406

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
Dot1x Statistics
Time Since
Counters Last
Cleared
If you specify the
18-12
GVRP Failed Registrations - The number of times
attempted GVRP registrations could not be completed.
GMRP PDU's received - The count of GMRP PDU's
received in the GARP layer.
GMRP PDU's Transmitted - The count of GMRP PDU's
transmitted from the GARP layer.
GMRP Failed Registrations - The number of times
attempted GMRP registrations could not be completed.
STP BPDUs Transmitted - Spanning Tree Protocol Bridge
Protocol Data Units sent
STP BPDUs Received - Spanning Tree Protocol Bridge Pro-
tocol Data Units received
RST BPDUs Transmitted - Rapid Spanning Tree Protocol
Bridge Protocol Data Units sent
RSTP BPDUs Received - Rapid Spanning Tree Protocol
Bridge Protocol Data Units received
MSTP BPDUs Transmitted - Multiple Spanning Tree Proto-
col Bridge Protocol Data Units sent
MSTP BPDUs Received - Multiple Spanning Tree Protocol
Bridge Protocol Data Units received
EAPOL Frames Received - The number of valid EAPOL
frames of any type that have been received by this authentica-
tor.
EAPOL Frames Transmitted - The number of EAPOL
frames of any type that have been transmitted by this authen-
ticator.
The elapsed time, in days, hours, minutes, and seconds since
the statistics for this port were last cleared.
value, the following information appears:
switchport
Octets Received - The total number of octets of data received
by the processor (excluding framing bits but including FCS
octets).
Total Packets Received Without Error- The total number
of packets (including broadcast packets and multicast pack-
ets) received by the processor.
v1.0, December 2005
System Maintenance Commands