Police-Simple; Policy-Map - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

13.4.8 police-simple

This command is used to establish the traffic policing style for the specified class. The
simple form of the police command uses a single data rate and burst size, resulting in two
outcomes: conform and violate. The conforming data rate is specified in kilobits-per-
second (Kbps) and is an integer from 1 to 4294967295. The conforming burst size is
specified in kilobytes (KB) and is an integer from 1 to 128.
For each outcome, the only possible actions are drop, set-cos-transmit, set-dscp-transmit,
set-prec-transmit, or transmit. In this simple form of the police command, the conform
action defaults to transmit and the violate action defaults to drop.
For set-dscp-transmit, a
from 0 to 63, or symbolically through one of the following keywords:
af22, af23, af31, af32, af33, af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef
For set-prec-transmit, an IP Precedence value is required. It is an integer from 0-7.
For set-cos-transmit an 802.1p priority value is required. It is an integer from 0-7.
Format
Mode
Incompatibilities

13.4.9 policy-map

This command establishes a new DiffServ policy. The
sensitive alphanumeric string from 1 to 31 characters uniquely identifying the policy. The
type of policy is specific to the inbound traffic direction as indicated by the in parameter.
Note: The policy type dictates which of the individual policy attribute commands
Note: The CLI mode is changed to Policy-Map Config when this command is
Quality of Service (QoS) Commands
value is required and is specified as either an integer
<dscpval>
police-simple {<1-4294967295> <1-128> conform-
action {drop | set-prec-transmit <0-7> | set-dscp-
transmit <0-63> | set-cos-transmit <0-7> | trans-
mit} [violate-action {drop | set-prec-transmit <0-
7> | set-dscp-transmit <0-63> | set-cos-transmit
<0-7> | transmit}]}
Policy-Class-Map Config
Drop, Mark (all forms)
are valid within the policy definition.
successfully executed.
v1.0, December 2005
af11, af12, af13, af21,
.
parameter is a case-
<policyname>
13-19