Show Ip Vrrp - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
Authentication
Type Mismatch
Packet Length
Errors

14.5.10 show ip vrrp

This command displays whether VRRP functionality is enabled or disabled on the 7300
Series Managed Switch. It also displays some global parameters which are required for
monitoring This command takes no options.
Format
Modes
VRRP Admin
Mode
Router Checksum
Errors
Router Version
Errors
Router VRID
Errors
14-28
Represents the total number of VRRP advertisements
received for which 'auth type' not equal to locally configured
one for this virtual router.
Represents the total number of VRRP packets received with
packet length less than length of VRRP header.
show ip vrrp
Privileged EXEC
User EXEC
Displays the administrative mode for VRRP functionality on
the switch.
Represents the total number of VRRP packets received with
an invalid VRRP checksum value.
Represents the total number of VRRP packets received with
Unknown or unsupported version number.
Represents the total number of VRRP packets received with
invalid VRID for this virtual router.
v1.0, December 2005
Routing Commands