Show Ip Mcast Boundary; Show Ip Mcast Interface - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
Table Max Size
Number Of
Packets For
Which Source Not
Found
Number Of
Packets For
Which Group Not
Found
Protocol
Entry Count
Highest Entry
Count

15.1.11 show ip mcast boundary

This command displays all the configured administrative scoped multicast boundaries.
Format
Modes
Interface
Group Ip
Mask

15.1.12 show ip mcast interface

This command displays the multicast information for the specified interface.
Format
Modes
Interface
TTL
IP Multicast Commands
The maximum number of entries allowed in the multicast
table.
The number of packets for which the source is not found.
The number of packets for which the group is not found.
The multicast protocol running on the router. Possible values
are PIMDM, PIMSM, or DVMRP.
The number of entries in the multicast table.
The highest entry count in the multicast table.
show ip mcast boundary {<slot/port> | all}
Privileged EXEC
User EXEC
Valid slot and port number separated by forward slashes.
The group IP address
The group IP mask
show ip mcast interface <slot/port>
Privileged EXEC
User EXEC
Valid slot and port number separated by forward slashes.
The time-to-live value for this interface.
v1.0, December 2005
15-7