Ip Dvmrp Trapflags; Ip Dvmrp; Show Ip Dvmrp - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual
Prosafe 7300 series layer-3 switches, software version 4.0
Hide thumbs
Also See for ProSafe GSM7324:
- Reference manual (263 pages) ,
- Installation manual (26 pages) ,
- Brochure & specs (2 pages)
Table of Contents
Advertisement
Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
15.2.3 ip dvmrp trapflags
This command enables the DVMRP trap mode.
Default
Format
Mode
15.2.3.1 no ip dvmrp trapflags
This command disables the DVMRP trap mode.
Format
Mode
15.2.4 ip dvmrp
This command sets the administrative mode of DVMRP on an interface to active.
Default
Format
Mode
15.2.4.1 no ip dvmrp
This command sets the administrative mode of DVMRP on an interface to inactive.
Format
Mode
15.2.5 show ip dvmrp
This command displays the system-wide information for DVMRP.
Format
Modes
Admin Mode
Version String
Number of
Routes
IP Multicast Commands
disabled
ip dvmrp trapflags
Global Config
no ip dvmrp trapflags
Global Config
disabled
ip dvmrp
Interface Config
no ip dvmrp
Interface Config
show ip dvmrp
Privileged EXEC
User EXEC
This field indicates whether DVMRP is enabled or disabled.
The version of DVMRP being used.
The number of routes in the DVMRP routing table.
v1.0, December 2005
15-13
Advertisement
Chapters
Table of Contents
