Dhcp Server Clear And Show Commands; Clear Ip Dhcp Binding; Clear Ip Dhcp Server Statistics; Clear Ip Dhcp Conflict - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

7.3 DHCP Server Clear and Show Commands

This section describes the commands you to delete various DHCP information and the
commands you use to view DHCP configuration information and statistics.

7.3.1 clear ip dhcp binding

This command deletes an automatic address binding from the DHCP server database. If
"*" is specified, the bindings corresponding to all the addresses are deleted.
a valid IP address made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0
is invalid.
Default
Format
Mode

7.3.2 clear ip dhcp server statistics

This command clears DHCP server statistics counters.
Format
Mode

7.3.3 clear ip dhcp conflict

The command is used to clear an address conflict from the DHCP Server database. The
server detects conflicts using a ping. DHCP server clears all conflicts If the asterisk (*)
character is used as the address parameter.
Default
Format
Mode
7-12
none
clear ip dhcp binding {address | *}
Privileged EXEC
clear ip dhcp server statistics
Privileged EXEC
none
clear ip dhcp conflict {<address> | *}
Privileged EXEC
v1.0, December 2005
is
<address>
DHCP Commands