Show Gvrp Configuration - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual
Prosafe 7300 series layer-3 switches, software version 4.0
Hide thumbs
Also See for ProSafe GSM7324:
- Reference manual (263 pages) ,
- Installation manual (26 pages) ,
- Brochure & specs (2 pages)
Table of Contents
Advertisement
Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
8.2.2.1 no set gvrp interfacemode
This command disables GVRP. If GVRP is disabled, Join Time, Leave Time and Leave
All Time have no effect.
Format
Modes
8.2.3 show gvrp configuration
This command displays Generic Attributes Registration Protocol (GARP) information for
one or all interfaces.
Format
Modes
Interface
Join Timer
Leave Timer
LeaveAll Timer
8-6
no set gvrp interfacemode
Interface Config
Global Config
show gvrp configuration {<slot/port> | all}
Privileged EXEC
User EXEC
Valid slot and port number separated by forward slashes.
Specifies the interval between the transmission of GARP
PDUs registering (or re-registering) membership for an
attribute. Current attributes are a VLAN or multicast group.
There is an instance of this timer on a per-Port, per-GARP
participant basis. Permissible values are 10 to 100 centisec-
onds (0.1 to 1.0 seconds). The factory default is 20 centisec-
onds (0.2 seconds). The finest granularity of specification is
one centisecond (0.01 seconds).
Specifies the period of time to wait after receiving an unreg-
ister request for an attribute before deleting the attribute. Cur-
rent attributes are a VLAN or multicast group. This may be
considered a buffer time for another station to assert registra-
tion for the same attribute in order to maintain uninterrupted
service. There is an instance of this timer on a per-Port, per-
GARP participant basis. Permissible values are 20 to 600
centiseconds (0.2 to 6.0 seconds). The factory default is 60
centiseconds (0.6 seconds).
This Leave All Time controls how frequently LeaveAll PDUs
are generated. A LeaveAll PDU indicates that all registra-
tions will shortly be deregistered. Participants will need to
rejoin in order to maintain registration. There is an instance
of this timer on a per-Port, per-GARP participant basis. The
v1.0, December 2005
GARP, GVRP, and GMRP Commands
Advertisement
Chapters
Table of Contents
