Show Telnetcon - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
Allow New
Outbound Telnet
Sessions

3.3.9 show telnetcon

This command displays telnet settings.
Format
Modes
Remote
Connection Login
Timeout
(minutes)
Maximum Number
of Remote
Connection
Sessions
Allow New Telnet
Sessions
3-12
Indicates whether outbound telnet sessions are allowed.
show telnetcon
Privileged EXEC
User EXEC
This object indicates the number of minutes a remote connec-
tion session is allowed to remain inactive before being logged
off. May be specified as a number from 1 to 160. The factory
default is 5.
This object indicates the number of simultaneous remote con-
nection sessions allowed. The factory default is 5.
Indicates that new telnet sessions will not be allowed when
set to no. The factory default value is yes.
v1.0, December 2005
Administrative Access Commands