Garp, Gvrp, And Gmrp Commands - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

This section describes the Generic Attribute Registration Protocol (GARP), GARP VLAN
Registration Protocol (GVRP), and Garp Multicast Registration Protocol (GVMP)
commands available in the 7300 Series Managed Switch CLI. GARP is a protocol that
allows client stations to register with the switch for membership in VLANS (by using
GVMP) or multicast groups (by using GMRP).
This section contains the following topics:
• Section 8.1 "GARP Commands" on page 8-2
• Section 8.2 "GVRP Commands" on page 8-5
• Section 8.3 "GMRP Commands" on page 8-7
The commands in this section are in one of two functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration
setting.

GARP, GVRP, and GMRP Commands

GARP, GVRP, and GMRP Commands
v1.0, December 2005
Chapter 8
8-1