Show Ip Route Entry - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
The following information displays for each Next Hop.
Next Hop Intf
Next Hop IP
Address

14.2.16 show ip route entry

This command displays the entire route table.
Format
Mode
Network Address
Subnet Mask
Protocol
The following information displays for each Next Hop.
Next Hop
Interface
Next Hop IP
Address
Metric
Preference
Routing Commands
The outgoing router interface to use when forwarding traffic
to the next destination.
The outgoing router IP address to use when forwarding traffic
to the next router (if any) in the path toward the destination.
The next router will always be one of the adjacent neighbors
or the IP address of the local interface for a directly attached
network.
show ip route entry
Privileged EXEC
Is a valid network address identifying the network on the
specified interface.
Is a mask of the network and host portion of the IP address
for the attached network.
Tells which protocol added the specified route. The possibili-
ties are: local, static, OSPF or RIP.
The outgoing router interface to use when forwarding traffic
to the next destination.
The outgoing router IP address to use when forwarding traffic
to the next router (if any) in the path toward the destination.
The cost associated with this route.
The administrative distance associated with this route.
v1.0, December 2005
14-17