Show Ip Pimsm Candrptable; Show Ip Pimsm Componenttable; Show Ip Pimsm Interface - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

15.4.14 show ip pimsm candrptable

This command displays the IP multicast groups for which the local router is to advertise
itself as a Candidate-RP when the value of hold time is non-zero.
Format
Modes
Group Address
Group Mask
Address

15.4.15 show ip pimsm componenttable

This command displays the table containing objects specific to a PIM domain. One row
exists for each domain to which the router is connected.
Format
Modes
Component
Index
Component BSR
Address
Component BSR
Expiry Time
Component CRP
Hold Time

15.4.16 show ip pimsm interface

This command displays the interface information for PIM-SM on the specified interface.
Format
Modes
Interface
15-26
show ip pimsm candrptable
Privileged EXEC
User EXEC
The IP multicast group address.
The multicast group address subnet mask.
The unicast address of the interface that will be advertised as
a Candidate-RP.
show ip pimsm componenttable
Privileged EXEC
User EXEC
A number which uniquely identifies the component.
The IP address of the bootstrap router (BSR) for the local
PIM region.
The minimum time remaining before the BSR in the local
domain will be declared down.
The hold time of the component when it is a candidate.
show ip pimsm interface <slot/port>
Privileged EXEC
User EXEC
Valid slot and port number separated by forward slashes.
v1.0, December 2005
IP Multicast Commands