Addport; Deleteport (Interface Config); Deleteport (Global Config); Port-Channel - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-

12.1.1 addport

This command adds one port to the port-channel (LAG). The first interface is a logical
unit, slot and port number of a configured port-channel.
Note: Before adding a port to a port-channel, set the physical mode of the port.
Format
Mode

12.1.2 deleteport (Interface Config)

This command deletes the port from the port-channel (LAG). The interface is a logical slot
and port number of a configured port-channel.
Format
Mode

12.1.3 deleteport (Global Config)

This command deletes all configured ports from the port-channel (LAG). The interface is
a logical slot and port number of a configured port-channel.
Format
Mode

12.1.4 port-channel

This command configures a new port-channel and generates a logical slot/port number for
the port-channel. The
character as well as alphanumeric characters. Display this number using the
command.
channel
Note: Before you include a port in a port-channel, set the port physical mode. For
Format
12-2
For more information, see
addport <logical slot/port>
Interface Config
deleteport <logical slot/port>
Interface Config
deleteport {<logical slot/port> | all}
Global Config
field is a character string which allows the dash "-"
<name>
more information, see
port-channel <name>
v1.0, March 2006
Section 4.1.8 "speed" on page
Section 4.1.8 "speed" on page
Port-Channel/LAG (802.3ad) Commands
4-4.
show port
4-4.