Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
12.2 Port-Channel Show Commands
This section describes the commands you use to view port-channel status and
configuration information.
12.2.1 show port-channel brief
This command displays the static capability of all port-channels (LAGs) on the device as
well as a summary of individual port-channels.
Format
Modes
Static Capability
For each port-channel the following information is displayed:
Name
Link State
Mbr Ports
Active Ports
12.2.2 show port-channel
This command displays an overview of all port-channels (LAGs) on the switch.
Format
Modes
Logical Interface
Port-Channel
Name
Link State
Admin Mode
12-6
show port-channel brief
Privileged EXEC
User EXEC
This field displays whether or not the device has static capa-
bility enabled.
This field displays the name of the port-channel.
This field indicates whether the link is up or down.
This field lists the ports that are members of this port-chan-
nel, in
notation.
<slot/port>
This field lists the ports that are actively participating in this
port-channel.
show port-channel {<logical slot/port> | all}
Privileged EXEC
User EXEC
Valid slot and port number separated by forward slashes.
The name of this port-channel (LAG). You may enter any
string of up to 15 alphanumeric characters.
Indicates whether the Link is up or down.
May be enabled or disabled. The factory default is enabled.
Port-Channel/LAG (802.3ad) Commands
v1.0, December 2005