NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual page 263

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
Uptime
Protocol
State Transitioned
to Master
Advertisement
Received
Advertisement
Interval Errors
Authentication
Failure
IP TTL errors
Zero Priority
Packets
Received
Zero Priority
Packets Sent
Invalid Type
Packets
Received
Address List
Errors
Invalid
Authentication
Type
Routing Commands
The time that the virtual router has been up, in days, hours,
minutes and seconds.
Represents the protocol configured on the interface.
Represents the total number of times virtual router state has
changed to MASTER.
Represents the total number of VRRP advertisements
received by this virtual router.
Represents the total number of VRRP advertisements
received for which advertisement interval is different than the
configured value for this virtual router.
Represents the total number of VRRP packets received that
don't pass the authentication check.
Represents the total number of VRRP packets received by the
virtual router with IP TTL (time to live) not equal to 255.
Represents the total number of VRRP packets received by
virtual router with a priority of '0'.
Represents the total number of VRRP packets sent by the vir-
tual router with a priority of '0'.
Represents the total number of VRRP packets received by the
virtual router with invalid 'type' field.
Represents the total number of VRRP packets received for
which address list does not match the locally configured list
for the virtual router.
Represents the total number of VRRP packets received with
unknown authentication type.
v1.0, December 2005
14-27