Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
11.1.2 clear dot1x statistics
This command resets the 802.1x statistics for the specified port or for all ports.
Format
Mode
11.1.3 clear radius statistics
This command is used to clear all RADIUS statistics.
Format
Mode
11.1.4 dot1x defaultlogin
This command assigns the authentication login list to use for non-configured users for
802.1x port security. This setting is over-ridden by the authentication login list assigned to
a specific user if the user is configured locally. If this value is not configured, users will be
authenticated using local authentication only.
Format
Mode
11.1.5 dot1x initialize
This command begins the initialization sequence on the specified port. This command is
only valid if the control mode for the specified port is 'auto'. If the control mode is not
'auto' an error will be returned.
Format
Mode
11.1.6 dot1x login
This command assigns the specified authentication login list to the specified user for
802.1x port security. The
parameter must be a configured authentication login list.
Format
Mode
Port-Based Access and Authentication Commands
clear dot1x statistics {<slot/port> | all}
Privileged EXEC
clear radius statistics
Privileged EXEC
dot1x defaultlogin <listname>
Global Config
dot1x initialize <slot/port>
Privileged EXEC
parameter must be a configured user and the
<user>
dot1x login <user> <listname>
Global Config
v1.0, December 2005
<listname>
11-3