Show Ip Dhcp Pool Configuration - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

7.3.6 show ip dhcp pool configuration

This command displays pool configuration. If
pools is displayed.
Format
Modes
Pool Name
Pool Type
Lease Time
DNS Servers
Default Routers
The following additional field is displayed for Dynamic pool type:
Network
The following additional fields are displayed for Manual pool type:
Client Name
Client Identifier
Hardware
Address
Hardware Address
Type
Host
7-14
all
show ip dhcp pool configuration {<name> | all}
Privileged EXEC
User EXEC
The name of the configured pool.
The pool type.
The lease expiration time of the IP Address assigned to the
client.
The list of DNS servers available to the DHCP client
The list of the default routers available to the DHCP client
The network number and the mask for the DHCP address
pool.
The name of a DHCP client.
The unique identifier of a DHCP client.
The hardware address of a DHCP client.
The protocol of the hardware platform.
The IP address and the mask for a manual binding to a DHCP
client.
v1.0, December 2005
is specified, configuration for all the
DHCP Commands