Show Radius - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
11.2.7.1 no radius server timeout
This command sets the timeout value to the default value.
Format
Mode

11.2.8 show radius

This command is used to display the various RADIUS configuration items for the switch
as well as the configured RADIUS servers. Format
Mode
Primary Server IP
Address
Number of
configured
servers
Max number of
retransmits
Timeout Duration
Accounting
Mode
If you include the optional
configured RADIUS servers is displayed.
IP Address
Port
Type
Secret
Configured
Message
Authenticator
Port-Based Access and Authentication Commands
no radius server timeout
Global Config
show radius [servers]
Privileged EXEC
Shows the configured server currently in use for authentica-
tion.
The configured IP address of the authentication server.
The configured value of the maximum number of times a
request packet is retransmitted.
The configured timeout value, in seconds, for request re-
transmissions.
Yes or No.
parameter, the following information regarding the
[servers]
IP Address of the configured RADIUS server.
The port in use by this server.
Primary or secondary.
Yes / No.
Enables or disables. the message authenticator attribute for
the selected server.
v1.0, December 2005
11-17