Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
14.8.9 bgp default local-preference
This command sets the local preference of the BGP4 router. The range for this field is -1 to
2147483647. A value of -1 indicates the absence of this attribute.
Default
Format
Mode
14.8.9.1 no bgp default local-preference
This command sets the default value of local preference of the BGP4 router.
Format
Mode
14.8.10 bgp flapdamping dampfactor
This command configures the flap damping factor. The range for this field is 1 to 65535
Default
Format
Mode
14.8.10.1 no bgp flapdamping dampfactor
This command configures the default flap damping factor.
Format
Mode
14.8.11 bgp flapdamping flapmaxtime
This command configures the flap entry lifetime in seconds. The range for this field is 1 to
65535
.
Default
Format
Mode
14-70
none
bgp default local-preference <-1-2147483647>
Router BGP Config
no bgp default local-preference
Router BGP Config
2
bgp flapdamping dampfactor <dampfactor>
Router BGP Config
no bgp flapdamping dampfactor
Router BGP Config
900
bgp flapdamping flapmaxtime <seconds>
Router BGP Config
v1.0, December 2005
.
Routing Commands