Show Vlan Port - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

6.2.3 show vlan port

This command displays VLAN port information.
Format
Modes
Interface
Port VLAN ID
Acceptable Frame
Types
Ingress Filtering
GVRP
Default Priority
VLAN Commands
show vlan port {<slot/port> | all}
Privileged EXEC
User EXEC
Valid slot and port number separated by forward slashes. It is
possible to set the parameters for all ports by using the selec-
tors on the top line.
The VLAN ID that this port will assign to untagged frames or
priority tagged frames received on this port. The value must
be for an existing VLAN. The factory default is 1.
Specifies the types of frames that may be received on this
port. The options are 'VLAN only' and 'Admit All'. When set
to 'VLAN only', untagged frames or priority tagged frames
received on this port are discarded. When set to 'Admit All',
untagged frames or priority tagged frames received on this
port are accepted and assigned the value of the Port VLAN
ID for this port. With either option, VLAN tagged frames are
forwarded in accordance to the 802.1Q VLAN specification.
May be enabled or disabled. When enabled, the frame is dis-
carded if this port is not a member of the VLAN with which
this frame is associated. In a tagged frame, the VLAN is iden-
tified by the VLAN ID in the tag. In an untagged frame, the
VLAN is the Port VLAN ID specified for the port that
received this frame. When disabled, all frames are forwarded
in accordance with the 802.1Q VLAN bridge specification.
The factory default is disabled.
be enabled or disabled.
May
The 802.1p priority assigned to tagged packets arriving on
the port.
v1.0, December 2005
6-13