Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches
12.1.1 addport
This command adds one port to the port-channel (LAG). The first interface is a logical
unit, slot and port number of a configured port-channel.
Note: Before adding a port to a port-channel, set the physical mode of the port.
Format
Mode
12.1.2 deleteport (Interface Config)
This command deletes the port from the port-channel (LAG). The interface is a logical slot
and port number of a configured port-channel.
Format
Mode
12.1.3 deleteport (Global Config)
This command deletes all configured ports from the port-channel (LAG). The interface is
a logical slot and port number of a configured port-channel.
Format
Mode
12.1.4 port-channel
This command configures a new port-channel and generates a logical unit/slot/port
number for the port-channel. The
"-" character as well as alphanumeric characters. Display this number using the
port channel
Note: Before you include a port in a port-channel, set the port physical mode. For
Format
Mode
12-2
For more information, see
addport <logical unit/slot/port>
Interface Config
deleteport <logical unit/slot/port>
Interface Config
deleteport {<logical unit/slot/port> | all}
Global Config
<name>
command.
more information, see
port-channel <name>
Global Config
v1.0, October 2008
Section 4.1.11 "speed" on page
field is a character string which allows the dash
Section 4.1.11 "speed" on page
Port-Channel/LAG (802.3ad) Commands
5.
show
5.