Show Users Authentication; Radius Commands; Radius Accounting Mode - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

11.1.21 show users authentication

This command displays all user and all authentication login information. It also displays
the authentication login list assigned to the default user.
Format
Mode
User
System Login
802.1x Port
Security

11.2 RADIUS Commands

This section describes the commands you use to configure the 7300 Series Managed
Switch to use a Remote Authentication Dial-In User Service (RADIUS) server on your
network for authentication and accounting.

11.2.1 radius accounting mode

Use this command to enable the RADIUS accounting function.
Default
Format
Mode
11.2.1.1 no radius accounting mode
Use this command to disable the RADIUS accounting function.
Format
Mode
Port-Based Access and Authentication Commands
show users authentication
Privileged EXEC
Lists every user that has an authentication login list assigned.
Displays the authentication login list assigned to the user for
system login.
Displays the authentication login list assigned to the user for
802.1x port security.
disabled
radius accounting mode
Global Config
no radius accounting mode
Global Config
v1.0, December 2005
11-13