Show Ip Bgp Nlrilist; Show Ip Bgp Pathattrtable - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

14.8.72 show ip bgp nlrilist

This command displays all the NLRI (Network Layer Reachability Information) entries in
the BGP4 route table.
Format
Mode
Prefix/len
NextHop
VpnCosId
Send Now

14.8.73 show ip bgp pathattrtable

This command displays the BGP4 received path attribute table. This table contains one
entry per path to a network, with path attributes received from all peers running BGP4.
Format
Mode
Peer
Prefix/Length
Origin
ASPath
NextHop
MultiExitDisc
14-100
show ip bgp nlrilist
Privileged EXEC
This displays the prefix and the prefix length of this entry in
the NLRI list.
This displays the Next Hop for this entry in the NLRI List.
This displays the VPN/CoS ID for this entry in the NLRI
List.
This field indicates whether or not this prefix is being sent
show ip bgp pathattrtable
Privileged EXEC
The IP address of the peer for this path attribute.
The network/prefix-length (i.e. route) for this path attribute.
The origin of the information. This can have three values:
IGP - learned from an internal peer
EGP - learned from an external peer
Incomplete - origin of information not known
Displays the segments of the ASPath (the path taken by the
update through the different autonomous systems -- this path
is used to prevent loops). If the path attribute has no value, it
will show "empty".
The address of the router that will be the destination for traf-
fic to the network of this path attribute.
This field displays the value of the multi-exit-discriminator
(MED) metric which discriminates between multiple exit
points to an adjacent autonomous system.
v1.0, December 2005
Routing Commands