Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
4.3 Keying for Advanced Features
This section describes the commands you use to enter the licence key to access advanced
features. You cannot access the advanced features without a valid license key.
4.3.1 license advanced
This command enables a particular feature. This command also enables the corresponding
show commands for a feature.
Note: If the feature is enabled, the feature is visible in the output of the
Format
Mode
4.3.1.1 no license advanced
This command disables a particular feature. This command also disables the
corresponding show commands. The
the feature.
Format
Mode
4.3.2 show key-features
This command displays the enabled or disabled status for all keyable features.
Format
Modes
Function
Status
Port and System Setup Commands
command. The
running-config
hexadecimal key for the feature.
license advanced <key>
Privileged EXEC
no license advanced <key>
Privileged EXEC
show key-features
Privileged EXEC
User EXEC
This is the name of the keyable component or feature.
Enabled or disabled.
v1.0, December 2005
parameter specifies the
<key>
parameter specifies the hexadecimal key for
<key>
show
4-9