NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual page 404

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
Packets
Transmitted
Successfully
Transmit Errors
18-10
Packets Transmitted 512-1023 Octets - The total number of
packets (including bad packets) received that were between
512 and 1023 octets in length inclusive (excluding framing
bits but including FCS octets).
Packets Transmitted 1024-1518 Octets - The total number
of packets (including bad packets) received that were
between 1024 and 1518 octets in length inclusive (excluding
framing bits but including FCS octets).
Packets Transmitted 1519-1522 Octets - The total number
of packets (including bad packets) received that were
between 1519 and 1522 octets in length inclusive (excluding
framing bits but including FCS octets).
Max Info - The maximum size of the Info (non-MAC) field
that this port will receive or transmit.
Total - The number of frames that have been transmitted by
this port to its segment.
Unicast Packets Transmitted - The total number of packets
that higher-level protocols requested be transmitted to a sub-
network-unicast address, including those that were discarded
or not sent.
Multicast Packets Transmitted - The total number of pack-
ets that higher-level protocols requested be transmitted to a
Multicast address, including those that were discarded or not
sent.
Broadcast Packets Transmitted - The total number of pack-
ets that higher-level protocols requested be transmitted to the
Broadcast address, including those that were discarded or not
sent.
Total Errors - The sum of Single, Multiple, and Excessive
Collisions.
Tx FCS Errors - The total number of packets transmitted
that had a length (excluding framing bits, but including FCS
octets) of between 64 and 1518 octets, inclusive, but had a
bad Frame Check Sequence (FCS) with an integral number of
octets
v1.0, December 2005
System Maintenance Commands