Show Spanning-Tree Mst Port Summary - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
Designated Port
Cost
Designated
Bridge
Designated Port
Identifier
Topology Change
Acknowledgement Value of flag in next Configuration Bridge Protocol Data
Hello Time
Edge Port
Edge Port Status
Point To Point
MAC Status
CST Regional
Root
CST Port Cost

5.2.5 show spanning-tree mst port summary

This command displays the settings of one or all ports within the specified multiple
spanning tree instance. The parameter
parameter {
<slot/port> | all}
If you specify 0 (defined as the default CIST ID) as the
displays for one or all ports within the common and internal spanning tree.
Format
Modes
MST Instance ID
Interface
Type
Spanning Tree Protocol Commands
Path Cost offered to the LAN by the Designated Port.
The bridge containing the designated port
Port on the Designated Bridge that offers the lowest cost to
the LAN
Unit (BPDU) transmission indicating if a topology change is
in progress for this port.
The hello time in use for this port.
The configured value indicating if this port is an edge port.
The derived value of the edge port status. True if operating as
an edge port; false otherwise.
Derived value indicating if this port is part of a point to point
link
.
The regional root identifier in use for this port.
The configured path cost for this port.
indicates a particular MST instance. The
<mstid>
indicates the desired switch port or all ports.
show spanning-tree mst port summary <mstid> {<slot/
port> | all}
Privileged EXEC
User EXEC
The MST instance associated with this port.
Valid slot and port number separated by forward slashes.
Currently not used.
v1.0, December 2005
, the status summary
<mstid>
5-15