Vlan Commands; Show Spanning-Tree Vlan - NETGEAR ProSafe GSM7224P User Manual

Term Definition
Spanning Tree
Enabled or disabled.
Adminmode
Spanning Tree
Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w, or IEEE 802.1d) based
Version
upon the Force Protocol Version parameter.
BPDU Guard
Enabled or disabled.
Mode
BPDU Filter
Enabled or disabled.
Mode
Configuration
Identifier used to identify the configuration currently being used.
Name
Configuration
Identifier used to identify the configuration currently being used.
Revision Level
Configuration
A generated Key used in the exchange of the BPDUs.
Digest Key
Configuration
Specifies the version of the configuration format being used in the exchange of BPDUs.
Format Selector
The default value is zero.
MST Instances
List of all multiple spanning tree instances configured on the switch.

show spanning-tree vlan

This command displays the association between a VLAN and a multiple spanning tree
instance. The <vlanid> corresponds to an existing VLAN ID.
Format
show spanning-tree vlan <vlanid>
Mode
• Privileged EXEC
• User EXEC
Term Definition
VLAN Identifier
The VLANs associated with the selected MST instance.
Associated
Identifier for the associated multiple spanning tree instance or "CST" if associated with
Instance
the common and internal spanning tree.

VLAN Commands

This section describes the commands you use to configure VLAN settings.
ProSafe Managed Switch
Switching Commands
63