This section describes the VLAN commands available in the 7300S Series Stackable
Switch CLI. VLANs allow users located on different physical networks to be on the same
logical network.
The VLAN Commands section includes the following topics:
•
Section 6.1 "VLAN Configuration Commands" on page 6-1
•
Section 6.2 "VLAN Show Commands" on page 6-12
•
Section 6.3 "Double VLAN Commands" on page 6-15
•
Section 6.4 "Provisioning (IEEE 802.1p) Commands" on page 6-20
The commands in this section are in one of two functional groups:
•
Show commands display switch settings, statistics, and other information.
•
Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration
setting.
6.1 VLAN Configuration Commands
This section describes the commands you use to configure VLAN settings.
6.1.1 vlan association mac
This command associates a MAC address to a VLAN.
Format
Mode
Association options are:
Mac Address
VLAN Commands
vlan association mac <macaddr> <vlanid>
VLAN Config
A MAC address for which the switch has forwarding and/or
filtering information. The format is 6 or 8 two-digit hexadec-
v3.0, January 2008
Chapter 6
VLAN Commands
6-1