Vlan Commands; Vlan Configuration Commands; Vlan Association Mac - NETGEAR GSM7248R Command Line Interface Reference Manual

This section describes the VLAN commands available in the 7200RS Series Stackable
Switch CLI. VLANs allow users located on different physical networks to be on the same
logical network.
The VLAN Commands section includes the following topics:
• Section 6.1 "VLAN Configuration Commands" on page 6-1
• Section 6.2 "VLAN Show Commands" on page 6-11
• Section 6.3 "Double VLAN Commands" on page 6-14
• Section 6.4 "Provisioning (IEEE 802.1p) Commands" on page 6-17
The commands in this section are in one of two functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration
setting.

6.1 VLAN Configuration Commands

This section describes the commands you use to configure VLAN settings.

6.1.1 vlan association mac

This command associates a MAC address to create a MAC-based VLAN.
Format
Mode
Association options are:
Mac Address

VLAN Commands

vlan association mac <macaddr> <vlanid>
VLAN Config
A MAC address for which the switch has forwarding and/or
filtering information. The format is 6 or 8 two-digit hexadec-
v1.0, October 2008
Chapter 6
VLAN Commands
6-1