Nortel DMS-100 Series Replacement Procedures page 500

1-468 XPM card replacement procedures (continued)
NTBX02
in an RSC-S (DS-1) Model A RCC2
32
33
34
35
297-8021-547 Standard 14.02 May 2001
Record the date the card was replaced, the serial number of the card, and the
symptoms that prompted replacement of the card.
If you entered this procedure
from
alarm clearing procedures
other
Return to Alarm Clearing Procedures or other procedure that directed you to
this procedure. At the point where a faulty card list was produced, identify the
next faulty card on the list and go to the appropriate card replacement
procedure for that card in this manual.
Obtain further assistance in replacing this card by contacting the personnel
responsible for higher level of support.
You have successfully completed this procedure. Remove the sign from the
active unit and return to the maintenance procedure that directed you to this
card replacement procedure and continue as directed.
(end)
Do
step 33
step 35