Nortel DMS-100 Series Replacement Procedures page 731

Hide thumbs Also See for DMS-100 Series:

Table of Contents

Replacing an NTBX72 card in an RSCE LCME

At your Current Location

Proceed only if you have been directed to this card replacement procedure

from a step in a maintenance procedure, are using the procedure for verifying

or accepting cards, or have been directed to this procedure by your

maintenance support group.

Obtain an NTBX72 replacement card. Ensure the replacement card has the

same product equipment code (PEC), including sufﬁx, as the card that is to

At the MAP terminal

Set the MAP display to the PM level and post the LCME by typing

>MAPCI;MTC;PM;POST LCME site frame_no unit_no

and pressing the Enter key.

is the name of the site at which the LCME is located

is the number of the frame in which the LCME is located

is the number of the LCME with the faulty card

Example of a MAP display:

DMS-100 Family NA100 Card Replacement Procedures Volume 6 of 7 LET0015 and up

XPM card replacement procedures (continued)

in an RSC LCME