Nortel DMS-100 Series Replacement Procedures page 257

Application
Use this procedure to replace the following card in an RCO2.
PEC
NT7X05
Note: NT7X05 functionality is supported only when the RCO2 is provisioned with
the NTMX77 Unified Processor (UP). NT7X05 functionality is not supported when
the RCO2 is provisioned with the optional NTAX74 Cellular Access Processor
(CAP) instead of the NTMX77 UP.
Common procedures
None
Action
The following flowchart is only a summary of the procedure. To replace the
card, use the instructions in the procedure that follows the flowchart.
DMS-100 Family NA100 Card Replacement Procedures Volume 6 of 7 LET0015 and up
XPM card replacement procedures (continued) 1-225
in an RSC-S (PCM-30) Model B RCO2
Suffixes Name
AA Peripheral/Remote Loader-16
NT7X05