Nortel DMS-100 Series Replacement Procedures page 272

Hide thumbs Also See for DMS-100 Series:

Table of Contents

1-240 XPM card replacement procedures (continued)

297-8021-547 Standard 14.02 May 2001

Ensure the replacement card has the same PEC, including sufﬁx, as the

card you just removed.

Open the locking levers on the replacement card.

Align the card with the slots in the shelf and gently slide the card into the

Seat and lock the card.

Using your ﬁngers or thumbs, push on the upper and lower edges of the

faceplate to ensure the card is fully seated in the shelf.

Close the locking levers.