Nortel DMS-100 Series Replacement Procedures page 864

1-832 XPM card replacement procedures (continued)
NTEX54
in an RSC-S (DS-1) Model A LCME
297-8021-547 Standard 14.02 May 2001
frame_no
is the number of the frame
lcm_no
is the number of the LCM
c To begin changing the tuple, type
>CHA
and press the Enter key.
d To continue processing, type
>Y
and press the Enter key.
e Press the Enter key to scroll through the fields until you access the field
with the MAC address.
f Enter the new MAC address. Type
>drwr_id card_pec
and press the Enter key.
where
drwr_id
is the physical number of the drawer
card_pec
is NTEX54AA, NTEX54AB, or NTEX54BA
drwr_pec
is the PEC of the drawer
mac_address
is the MAC address of the new NTEX54
ip_address
is the IP address of the new NTEX54
g Press the Enter key to scroll through remaining fields.
h Confirm the change. Type
>Y
and press the Enter key.
i Exit the table. Type
>QUIT
and press the Enter key.
(continued)
drwr_pec mac_address ip_address