Nortel DMS-100 Series Replacement Procedures page 774

1-742 XPM card replacement procedures (continued)
NTEX17
in an RLCM
(end)
19
At the xEMS workstation
20
21
22
297-8021-547 Standard 14.02 May 2001
Obtain further assistance in replacing this card by contacting personnel
responsible for a higher level of support.
At the submap of the LCM line drawer with the NTEX17 card that you
replaced.
Place the cursor on the the XLC card you want to return the card to service
and use the mouse to select
Maintenance : XLC -> IDL
and press the Enter key.
The procedure is complete.