Nortel DMS-100 Series Replacement Procedures page 375

If you were directed here from
other
20 After replacing the faulty card, load the inactive unit by typing
>LOADPM UNIT unit_no
and pressing the Enter key.
where
unit_no
is the number of the inactive unit
If
message loadfile
found in directory is re-
ceived
load passes
load fails
21 Determine the type of device where the PM load files are located.
If load files are located on
tape
IOC disk
SLM disk
22 Locate the tape that contains the PM load files.
23 Mount the tape on a magnetic tape drive.
At the MAP terminal
24 Download the tape by typing
>MOUNT tape_no
and pressing the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files
25 List the contents of the tape in your user directory by typing
>LIST Ttape_no
and pressing the Enter key.
where
DMS-100 Family NA100 Card Replacement Procedures Volume 6 of 7 LET0015 and up
XPM card replacement procedures (continued)
in an SMA-MVI-20
Do
step 20
Do
step 21
not
step 40
step 47
Do
step 22
step 28
step 33
1-343
NTAX74
(continued)