Nortel DMS-100 Series Replacement Procedures page 230

1-198 XPM card replacement procedures (continued)
NT7X05
in an RSC-S (DS-1) Model A RCC2
Application
Use this procedure to replace the following cards in an RSC-RCC2.
PEC
NT7X05
Note: NT7X05 functionality is supported only when the RCC2 is provisioned with
the NTMX77 Unified Processor (UP). NT7X05 functionality is not supported when
the RCC2 is provisioned with the optional NTAX74 Cellular Access Processor
(CAP) instead of the NTMX77 UP.
Common procedures
None
Action
The following flowchart is a summary of the procedure. To replace the card,
use the instructions in the procedure that follows the flowchart.
297-8021-547 Standard 14.02 May 2001
Suffixes Name
AA Peripheral/Remote Loader-16