Ntax78 In An Sma - Nortel DMS-100 Series Replacement Procedures

Application
Use this procedure to replace an NTAX78 card in an SMA.
PEC
NTAX78
Common procedures
The following procedures are referenced in this procedure:
•
•
•
Do not go to the common procedures unless directed to do so in the step-action
procedure.
Action
The following flowchart is only a summary of the procedure. To replace the
card, use the instructions in the step-action procedure that follows the
flowchart.
DMS-100 Family NA100 Card Replacement Procedures Volume 6 of 7 LET0015 and up
Suffixes
AB
"Locating a faulty card in an SMA"
replacing a card
returning a card
XPM card replacement procedures (continued) 1-355
Name
Enhanced Time Switch
NTAX78
in an SMA