Nortel DMS-100 Series Replacement Procedures page 696

1-664 XPM card replacement procedures (continued)
NTBX35
in an RSC-S (PCM-30) Model A LCME
7
8
297-8021-547 Standard 14.02 May 2001
b Open the locking levers on the card to be replaced and gently pull the
card toward you until it clears the shelf.
c Ensure the replacement card has the same PEC, including suffix, as the
card you just removed.
Open the locking levers on the replacement card.
a Align the card with the slots in the shelf.
b Gently slide the card into the shelf.
Seat and lock the card.
a Using your fingers or thumbs, push on the upper and lower edges of the
faceplate to ensure the card is fully seated in the shelf.
b Close the locking levers.
(continued)