Ntmx45 In An Rlcm Hie - Nortel DMS-100 Series Replacement Procedures

1-898 XPM card replacement procedures (continued)
NTMX45
in an RLCM HIE
Application
Use this procedure to replace an NTMX45 in host interface equipment (HIE)
shelf.
PEC
NTMX45
If you cannot identify the PEC, suffix, and shelf or frame for the card you want
to replace, refer to the "Index" in this document. The index lists the cards,
shelves, and frames in this card replacement NTP.
Common procedures
This procedure does not refer to any common procedures.
Next level of maintenance
A problem can occur that requires the help of the local maintenance personnel.
Gather all important logs, reports, and system information (that is, product
type and current software load) for analysis. The related logs, maintenance
notes, and system information help make sure that the next level of
maintenance and support can find the problem. More detail about logs appears
in the Log Report Reference Manual.
Action
The flowchart that follows provides a summary of this procedure. Use the
instructions in the step-action procedure that follows the flowchart to replace
the card.
297-8021-547 Standard 14.02 May 2001
Suffixes Name
AA Emergency Stand-Alone (ESA) processor (EP)