Nortel DMS-100 Series Replacement Procedures page 823

Connector slot (16),
always unequipped
when NTEX54
DBIC is installed
DBIC RJ-45
connector
DBIC
14
DMS-100 Family NA100 Card Replacement Procedures Volume 6 of 7 LET0015 and up
XPM card replacement procedures (continued)
DANGER
Do not hold the card by the levers only
If you hold a card by the locking levers only, the levers can
break. Pull the card half way out of the slot. Carefully grasp
the card from below for more support. Continue to remove
the card from the drawer. Make sure that you do not touch
any wires or internal parts on the card.
NTEX54
in an RLCM
(continued)
Data cable trough
assembly
1-791