Nt6X92 In An Rsc-S (Ds-1) Model A Rcc2 - Nortel DMS-100 Series Replacement Procedures

Hide thumbs Also See for DMS-100 Series:

Table of Contents

Use this procedure to replace an NT6X92 card in an RSC-S RCC2.

Common procedures

The following ﬂowchart is only a summary of the procedure. To replace the

card, use the instructions in the procedure that follows the ﬂowchart.

DMS-100 Family NA100 Card Replacement Procedures Volume 6 of 7 LET0015 and up

To ensure peak performance, do not install the UTR and GTR on the

same RSC-S RCC2. Presently, there is no way of knowing which

receiver is used to interpret tones. Some call processing tones may be

degraded if designed for use with a GTR.

XPM card replacement procedures (continued) 1-79

in an RSC-S (DS-1) Model A RCC2

Universal Tone Receiver (UTR)

Global Tone Receiver (GTR)