Nortel DMS-100 Series Replacement Procedures page 133

in an RSC-S (PCM-30) Model A RCO2
c Ensure the replacement card has the same PEC, including suffix, as the
card you just removed.
11 Open the locking levers on the replacement card.
a Align the card with the slots in the shelf.
b Gently slide the card into the shelf.
12 Seat and lock the card.
a Using your fingers or thumbs, push on the upper and lower edges of the
faceplate to ensure the card is fully seated in the shelf.
b Close the locking levers.
DMS-100 Family NA100 Card Replacement Procedures Volume 6 of 7 LET0015 and up
XPM card replacement procedures (continued) 1-101
NT6X92
(continued)