Ntbx35 In An Rsc-S (Pcm-30) Model A Lcme - Nortel DMS-100 Series Replacement Procedures

in an RSC-S (PCM-30) Model A LCME
At the LCE frame
5
Put on a wrist strap.
6 Remove the NTBX35 card as shown in the following figures.
a Locate the card to be removed on the appropriate shelf.
DMS-100 Family NA100 Card Replacement Procedures Volume 6 of 7 LET0015 and up
XPM card replacement procedures (continued)
WARNING
Card damage—transport
Take these precautions to protect the circuit cards from
electrical and mechanical damage while transporting cards.
When handling a circuit card not in an electrostatic discharge
(ESD) protective container, stand on a conductive floor mat
and wear a wrist strap connected, through a 1-megohm
resistor, to a suitably grounded object such as a metal
workbench or a DMS switch frame (Northern Telecom
Corporate Standard 5028).
Store and transport circuit cards in an ESD protective
container.
DANGER
Equipment damage
Take these precautions when removing or inserting a card:
1. Do not apply direct pressure to the components.2. Do not
force the cards into the slots.
1-663
NTBX35
(continued)