Nortel DMS-100 Series Replacement Procedures page 448

Hide thumbs Also See for DMS-100 Series:

Table of Contents

1-416 XPM card replacement procedures (continued)

297-8021-547 Standard 14.02 May 2001

Record the date the card was replaced, the serial number of the card, and the

symptoms that prompted replacement of the card. Go to step 24.

Return to the procedure that directed you to this procedure. At the point

where a faulty card list was produced, identify the next faulty card on the list

and go to the appropriate card replacement procedure for that card in this

Obtain further assistance in replacing this card by contacting operating

company maintenance personnel.

You have successfully completed this procedure. Remove the sign from the

active unit and return to the maintenance procedure that directed you to this

card replacement procedure and continue as directed.

RSC-S (PCM-30) Model B RCO2